Gehl DL11-44 GEN:2

Gehl
Make Gehl
Model DL11-44 GEN:2
Type Telehandlers

How can we help?


Description

  • Rated Lift Capacity (kg): 11,000 lbs. (4990)
  • Gross Power (kW): 120 hp (89)
  • Maximum Lift Height (m): 44' 4" (13.5)
  • Maximum Forward Reach (m): 30' 6" (9.2)
  • Specifications

    • Capacities: Capacity at Maximum Forward Reach: 2,000 lbs.
    • Capacities: Capacity at Maximum Lift Height: 8,000 lbs.
    • Capacities: Lift Capacity: 11,000 lbs.
    • Capacities: Maximum Forward Reach: 30'6"
    • Capacities: Maximum Lift Height: 44'4"
    • Capacities: Maximum Reach Below Grade: 2'0"
    • Components: Brakes: Oil-Immersed, Disc-type
    • Components: Maximum Travel Speed : 22.8 mph
    • Components: Parking Brake: Spring-Applied, Hydraulic Release
    • Components: Selective Steering: 4-Wheel 2-Wheel Crab
    • Components: Transmission: 4-Speed Power Shift
    • Engine: Aspiration: Turbocharged
    • Engine: Manufacturer: Cummins
    • Engine: Model: 3.8L QSF Tier IV
    • Engine: Power : 120 hp
    • Engine: Rated Speed: 2,500 rpm
    • General Specifications: Approximate Weight: 25,400 lbs.
    • General Specifications: Frame Leveling - Left/Right: 10°/10°
    • General Specifications: Fuel Capacity: 30 gal.
    • General Specifications: Ground Clearance: 16"
    • General Specifications: Length - Less Forks: 20'7"
    • General Specifications: Overall Height: 7'11"
    • General Specifications: Recommended Tire Type: 14.00 x 24 G2 12-ply
    • General Specifications: Turning Radius: 12'2"
    • General Specifications: Wheelbase: 10'8"
    • General Specifications: Width: 8'3"
    • Hydraulics: Auxiliary Relief Pressure: 2,500 psi
    • Hydraulics: Hydraulic Reservoir Capacity : 45 gal.
    • Hydraulics: Main Relief Pressure : 3,000 psi
    • Hydraulics: Pump Type: Open-Center, Dual-Section
    • Hydraulics: Total Capacity : 43 gpm
    • Load Chart: : 6,000 lbs.
    • Load Chart: : 4,000 lbs.
    • Load Chart: : 10,000 lbs.
    • Load Chart: : 3,000 lbs.
    • Loader Performance: Breakout Force: 14,000 lbf
    • Loader Performance: Dump Angle at Maximum Dump Height: 24°
    • Loader Performance: Maximum Dump Height: 42'11"
    • Loader Performance: Maximum Dump Height at 45° Dump Angle: 34'0"
    • Loader Performance: Maximum Forward Reach at 45° Dump Angle: 14'3"
    • Loader Performance: Maximum Forward Reach at Maximum Dump Height: 2'3"
    • Loader Performance: Maximum Loadover Height: 43'11"
    • Loader Performance: Rollback at Ground Level: 30°
    • Loader Performance: Total Degrees of Bucket Rotation: 132°

    Features

    • Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.
    • Standard pneumatic tires.
    • Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.
    • Personnel Work Platform System allows the use of ANSI/ITSDF B56.6-compliant personnel work platforms for safety and efficiency.
    • Double universal joints for tight turn radius without applying stress on the axle.
    • Rifled bushings in key areas
    • ROPS and FOPS certified operator's compartment.
    • Easy access to hydraulic oil and transmission reservoirs.
    • Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
    • Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.
    • Exterior boom hose routings for easy access.
    • Transmission and hydraulics easily accessed through large hinged panel.
    • Choice of canopy or cab with heating and defrosting systems standard (air-conditioning optional).
    • Industry loading job site maneuverability with a 12' 2" turning radius.
    • Lockable, two-piece cab door for security, communication and cross-ventilation.
    • Remote Boom Control can raise/lower and extend/retract the boom, as well as start/stop the engine from the work platform or outside the cab.
    • Standard centrifugal pre-cleaner and two-stage air cleaner.
    • Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.
    • Hydraulic main control valve in back door.
    • Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.
    • 10-degree frame tilt in both directions.
    • Two-wheel, four-wheel, crab steering standard.
    • Choice of Dual-Function or Tri-Function pilot-operated joysticks that allow operators precise movement of heavy loads

    Links

    Contact

    Contact

    Consignment

    Request a Service

    ×

    Leppo Rents Employee Portal

    ×

    Your session will expire in . If you want to reset this timer, please click OK.

    Change Your Preferred Location


    ×

    Leppo Rents Employee Portal