Gehl DL11-55 GEN:2
| Make | Gehl |
| Model | DL11-55 GEN:2 |
| Type | Telehandlers |
How can we help?
Description
Specifications
- Capacities: Capacity at Maximum Forward Reach: 2,000 lbs.
- Capacities: Capacity at Maximum Lift Height: 5,000/5,500 lbs.
- Capacities: Lift Capacity: 11,000 lbs.
- Capacities: Maximum Forward Reach: 40'9"
- Capacities: Maximum Lift Height: 55'1"
- Capacities: Maximum Reach Below Grade: 2'10"
- Components: Brakes: Oil-Immersed, Disc-type
- Components: Maximum Travel Speed : 22.8 mph
- Components: Parking Brake: Spring-Applied, Hydraulic Release
- Components: Selective Steering: 4-Wheel 2-Wheel Crab
- Components: Transmission: 4-Speed Power Shift
- Engine: Aspiration: Turbocharged
- Engine: Manufacturer: Cummins
- Engine: Model: 3.8L QSF Tier IV
- Engine: Power : 120 hp
- Engine: Rated Speed: 2,500 rpm
- General Specifications: Approximate Weight: 28,460 lbs.
- General Specifications: Frame Leveling - Left/Right: 10°/10°
- General Specifications: Fuel Capacity: 30 gal.
- General Specifications: Ground Clearance: 16"
- General Specifications: Length - Less Forks: 20'10"
- General Specifications: Overall Height: 7'11"
- General Specifications: Recommended Tire Type: 14.00 x 24 G2 12-ply
- General Specifications: Turning Radius: 12'2"
- General Specifications: Wheelbase: 10'8"
- General Specifications: Width: 8'3"
- Hydraulics: Auxiliary Relief Pressure: 2,500 psi
- Hydraulics: Hydraulic Reservoir Capacity : 45 gal.
- Hydraulics: Main Relief Pressure : 3,000 psi
- Hydraulics: Pump Type: Open-Center, Dual-Section
- Hydraulics: Total Capacity : 43 gpm
- Load Chart: : 3,000 lbs.
- Load Chart: : 500 lbs.
- Load Chart: : 9,000 lbs.
- Load Chart: : 250 lbs.
- Load Chart: : 5,000 lbs.
- Load Chart: : 7,000 lbs.
- Load Chart: : 4,000 lbs.
- Load Chart: : 1,000 lbs.
- Loader Performance: Breakout Force: N/A
Features
- Remote Boom Control can raise/lower and extend/retract the boom, as well as start/stop the engine from the work platform or outside the cab.
- Standard pneumatic tires.
- Lockable, two-piece cab door for security, communication and cross-ventilation.
- Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.
- ROPS and FOPS certified operator's compartment.
- Choice of canopy or cab with heating and defrosting systems standard (air-conditioning optional).
- 10-degree frame tilt in both directions.
- Standard centrifugal pre-cleaner and two-stage air cleaner.
- Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.
- Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.
- Exterior boom hose routings for easy access.
- Rifled bushings in key areas
- Hydraulic main control valve in back door.
- Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
- Choice of Dual-Function or Tri-Function pilot-operated joysticks that allow operators precise movement of heavy loads
- Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.
- Double universal joints for tight turn radius without applying stress on the axle.
- Two-wheel, four-wheel, crab steering standard.
- Easy access to hydraulic oil and transmission reservoirs.
- Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.
- Transmission and hydraulics easily accessed through large hinged panel.
- Industry loading job site maneuverability with a 12' 2" turning radius.
- Personnel Work Platform System allows the use of ANSI/ITSDF B56.6-compliant personnel work platforms for safety and efficiency.