Features

• 10-degree frame tilt in both directions.

• Remote Boom Control can raise/lower and extend/retract the boom, as well as start/stop the engine from the work platform or outside the cab.

• Hydraulic main control valve in back door.

• Easy access to hydraulic oil and transmission reservoirs.

• Rifled bushings in key areas

• Double universal joints for tight turn radius without applyingstress on the axle.

• Choice of Dual-Function or Tri-Function pilot-operated joysticks that allow operators precise movement of heavy loads

• Personnel Work Platform System allows the use of ANSI/ITSDF B56.6-compliant personnel work platforms for safety and efficiency.

• Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.

• Industry loading job site maneuverability with a 12' 2" turning radius.

• Exterior boom hose routings for easy access.

• Standard pneumatic tires.

• Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.

• Standard centrifugal pre-cleaner and two-stage air cleaner.

• Two-wheel, four-wheel, crab steering standard.

• Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.

• Choice of canopy or cab with heating and defrosting  systems standard (air-conditioning optional).

• Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.

• Transmission and hydraulics easily accessed through large hinged panel.

• Lockable, two-piece cab door for security, communication and cross-ventilation.

• Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.

• ROPS and FOPS certified operator's compartment.

• Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.