Pettibone EXTENDO 1056X
| Make | Pettibone |
| Model | EXTENDO 1056X |
| Type | Telehandlers |
How can we help?
Description
The Extendo 1056X telehandler delivers 10,000 pounds max load capacity and up to 56 feet of lift height. It is available with either a Cummins or Deutz Tier 4 Final diesel engine.
Drivetrain and axles have been optimized to provide greater tractive effort with minimal tradeoff on top end speed.
- Dana 212 Series high steer axles provide excellent tractive effort.
- Tight steer angle capability provides efficient turning radius.
- Dana VDT12000 Powershift transmission offers 3 speeds, forward and reverse.
- Full time 4-wheel-drive with limited-slip front axle differential.
Newly designed boom with formed boom plates offers greater strength with less weight.
- Boom deflection minimized for better control and accuracy placing loads.
- Boom overlap nearly doubled to provide smoother operation and reduce contact forces on wear pads.
- Fastener-less wear pads simplify service.
- Bottom-mounted external extend cylinder significantly reduces load on wear pads; cylinder location also provides better service access to internal boom components.
- Compression tilt design allows for a smaller bore cylinder with same tilt force.
- Single extension chain eliminates the need to balance dual chains.
The Extendo's hydraulic circuit delivers exceptional controllability, efficiency and cycle speeds.
- Cylinder cushioning dampens the end of strokes – both extending and retracting – to prevent hard, jarring stops and avoid both wear-and-tear and potential load spills.
- Single lift cylinder provides operator with clear sight lines.
- Twin lines for tilt and auxiliary plumbing.
The operator cab includes ergonomic seat, pedal, joystick and steering wheel positions. Available as an open canopy or enclosed cab, it features an all-steel interior with water-resistant components for easy washdown. - New analog/LCD gauge cluster.
- Enhanced climate control system.
- Split door design allows upper half to lock in the open position.
- Flat, bolt-in glass can easily be removed or replaced.
- Openable rear window improves air flow while keeping cab dry.
- Lockable storage area under seat for manual, gloves and tools.
- Split-system electrical panels allow for easier service of individual circuits.
- Heavy-duty bright LED lighting
- Weather-sealed connections
- USB accessory plug in cab
- 12-volt accessory plug in engine bay
Service
- Easy access to all filters and fluid level indicators.
- Lockable fuel-fill in clean, accessible location.
- Inside of boom easily accessible for service.
- Non-tensioned boom hoses offer long service life.
Models
Engine
74 HP (55 kW) Deutz Tier 4 diesel engine or 117 HP (87 kW) Cummins QSF3.8 Tier 4 turbo diesel with DEF and SCR aftertreatment
Premium Gauge Cluster
Premium gauge cluster upgrade includes a 7-inch digital display.
Rear-View Camera
Rear-view camera system is included with the digital display, or available as an add-on to standard gauges.
Tires
Air-filled, foam-filled, solid
Enclosed Cab
Enclosed cab with heater, wiper, defroster (A/C available)
Attachments
The 1056X can be equipped with a variety of attachments, including pallet, lumber or block forks, truss boom, utility bucket, standard carriage, side tilt carriage (+/- 10°), or side-swing carriage (+/- 60°).
Sling Hook
Sling hook available for additional securing of load
Electrical to Boom Tip
Electrical to boom tip (second hydraulic circuit, lighting, camera)
Fenders
Four axle mounted fenders
Lighting
High output LED lighting package (roading lights, turn signals, boom work light, amber beacon, dome)
Pintle Hitch
Bolt-on rear pintle hitch for towing
Specifications
- Approximate Operating Weight : 27,500 lbs (12,474 kg)
- Axles: Dana 212 Series: 4-wheel drive, 45% limited slip front differential
- Below Grade Reach : 3' (92 cm)
- Boom: 4-section, slide pad Automatic fork leveling without slave cylinder
- Brakes: Oil-immersed inboard disc service brakes, integral front SAHR park brake
- Controls: Single joystick, pilot operated
- Drawbar Pull (GVW) : 26,250 lbs. (11,907 kg)
- Features : Fully proportional functions Auxiliary boom tip hydraulics Quick disconnect for attachments
- Fork Carriage : 48" (122 cm) standard
- Frame : 20° of leveling (10° right and left) Rear axle stabilization system
- Fuel Tank : 30 gal. (114 L)
- Ground Clearance : 18" (46 cm)
- Landing Height : 52' (1,585 cm)
- Max Load Capacity : 10,000 lbs (4,536 kg)
- Maximum Forward Reach : 40' (1,219 cm) at 24" LC
- Maximum Lift Height : 56' (1,707 cm)
- Maximum Travel Speed : 15.2 mph (24.5 km/h)
- Model/Power : 74 HP (55 kW) Cummins QSF3.8 Tier 4 turbo diesel with DOC muffler
- Overall Height : 8' 11" (272 cm) boom down
- Overall Length : 22' 11" (699 cm) to fork frame
- Overall Width : 8' 6" (259 cm)
- Pallet Forks : 2 x 4 x 48" standard
- Steering : 4 wheel, 2 wheel, and crab steer
- System : Pressure comp, axial piston pump
- Tires: 13.00 x 24, 16 ply, G2 tread air-fill standard
- Transmission : Dana VDT12000 Series, 3-speed Powershift, forward & reverse
- Turning Radius : 14' 4" (437 cm)
Features
- Damage-resistant, all-steel fuel and hydraulic tanks. Fuel tank provides ample fuel volume for a full day's work at 100% load.
- The 1056X has a capable 10,000-pound load capacity rating. It achieves forward reach up to 40 feet and a maximum lift height of 56 feet.
- The 74-horsepower Cummins QSF3.8 Tier 4 Final diesel engine features a DOC muffler and requires no diesel exhaust fluid (DEF). Side pod mounting offers easy service access while allowing excellent curbside visibility and ground clearance. Also available with a 74-horsepower Deutz or 117-horsepower Cummins engine.
Copy Set
Engine
74 HP (55 kW) Deutz Tier 4 diesel engine or 117 HP (87 kW) Cummins QSF3.8 Tier 4 turbo diesel with DEF and SCR aftertreatment
Premium Gauge Cluster
Premium gauge cluster upgrade includes a 7-inch digital display.
Rear-View Camera
Rear-view camera system is included with the digital display, or available as an add-on to standard gauges.
Tires
Air-filled, foam-filled, solid
Enclosed Cab
Enclosed cab with heater, wiper, defroster (A/C available)
Attachments
The 1056X can be equipped with a variety of attachments, including pallet, lumber or block forks, truss boom, utility bucket, standard carriage, side tilt carriage (+/- 10°), or side-swing carriage (+/- 60°).
Sling Hook
Sling hook available for additional securing of load
Electrical to Boom Tip
Electrical to boom tip (second hydraulic circuit, lighting, camera)
Fenders
Four axle mounted fenders
Lighting
High output LED lighting package (roading lights, turn signals, boom work light, amber beacon, dome)
Pintle Hitch
Bolt-on rear pintle hitch for towing