Pettibone EXTENDO 1246X

Pettibone
Pettibone
Make Pettibone
Model EXTENDO 1246X
Type Telehandlers

How can we help?


Description

The Extendo 1246X is a true material handling workhorse, delivering impressive load capacity, superior longevity, and controllability on a wide array of applications.

Drivetrain and axles have been optimized to provide greater tractive effort with minimal tradeoff on top end speed.

  • Dana 223 Series high steer axles provide excellent tractive effort.
  • Tight steer angle capability provides efficient turning radius.
  • Dana VDT12000 Powershift transmission offers 3 speeds, forward and reverse.
  • Full time 4-wheel-drive with limited-slip front axle differential.

Formed boom plates offer greater boom strength with less weight.

  • Boom deflection minimized for better control and accuracy placing loads.
  • Boom overlap nearly doubled to provide smoother operation and reduce contact forces on wear pads.
  • Fastener-less wear pads simplify service.
  • Bottom-mounted external extend cylinder significantly reduces load on wear pads; cylinder location also provides better service access to internal boom components.
  • Compression tilt design allows for a smaller bore cylinder with same tilt force.
  • Heavy-duty extension chains help ensure stable boom functions and longevity.

The Extendo's hydraulic circuit delivers exceptional controllability, efficiency and cycle speeds.

  • Cylinder cushioning dampens the end of strokes – both extending and retracting – to prevent hard, jarring stops and avoid both wear-and-tear and potential load spills.
  • Single lift cylinder provides operator with clear sight lines.
  • Twin lines for tilt and auxiliary plumbing.

The operator cab includes ergonomic seat, pedal, joystick and steering wheel positions. Available as an open canopy or enclosed cab, it features an all-steel interior with water-resistant components for easy washdown.

  • New analog/LCD gauge cluster.
  • Enhanced climate control system.
  • Split door design allows upper half to lock in the open position.
  • Flat, bolt-in glass can easily be removed or replaced.
  • Openable rear window improves air flow while keeping cab dry.
  • Lockable storage area under seat for manual, gloves and tools.
Electrical
  • Split-system electrical panels allow for easier service of individual circuits.
  • Heavy-duty bright LED lighting.
  • Weather-sealed connections.
  • USB accessory plug in cab.
  • 12-volt accessory plug in engine bay.

Service

  • Easy access to all filters and fluid level indicators.
  • Lockable fuel-fill in clean, accessible location.
  • Inside of boom easily accessible for service.
  • Non-tensioned boom hoses offer long service life.

      Models

      Attachments

      The 1246X can be equipped with a variety of attachments, including pallet, lumber or block forks, truss boom, utility bucket, standard carriage, side tilt carriage (+/- 10°), or side-swing carriage (+/- 60°). Optional 10-foot tower with standard carriage provides 10 extra feet of lift height.

      Premium Gauge Cluster

      Premium gauge cluster upgrade includes a 7-inch digital display.

      Rear-View Camera

      Rear-view camera system is included with the digital display, or available as an add-on to standard gauges.

      Tires

      Foam-filled, solid


      Enclosed Cab

      Enclosed cab with heater, wiper, defroster (A/C available)

      Outriggers

      Axle-mounted outriggers

      Sling Hook

      Sling hook available for additional securing of load

      Electrical to Boom Tip

      Electrical to boom tip (second hydraulic circuit, lighting, camera)

      Lighting

      High output LED lighting package (roading lights, turn signals, boom work light, amber beacon, dome)

      Pintle Hitch

      Bolt-on rear pintle hitch for towing

      Specifications

      • Approximate Operating Weight : 29,250 lbs (13,268 kg) without outriggers 30,750 lbs (13,948 kg) with outriggers
      • Axles: Dana 223 Series: 4-wheel drive, 45% limited slip front differential
      • Below Grade Reach : 3' 2" (97 cm)
      • Boom: 3-section, slide pad Automatic fork leveling without slave cylinder
      • Brakes: Oil-immersed inboard disc service brakes, integral front SAHR park brake
      • Controls: Single joystick, pilot operated
      • DEF Tank : 5 gal. (19 L)
      • Drawbar Pull (GVW) : 28,600 lbs (12,973 kg)
      • Features : Fully proportional functions Auxiliary boom tip hydraulics Quick disconnect for attachments
      • Fork Carriage : 48" (122 cm) standard
      • Frame: 24° of leveling (12° right and left) Rear axle stabilization system
      • Fuel Tank : 30 gal. (114 L)
      • Ground Clearance : 19" (48 cm)
      • Landing Height : 42' (1,280 cm)
      • Max Load Capacity : 12,000 lbs (5,443 kg)
      • Maximum Forward Reach : 30' (915 cm) at 24" LC
      • Maximum Lift Height : 46' 6" (1,417 cm)
      • Maximum Travel Speed : 15.2 mph (24.5 km/h)
      • Model/Power : 117 HP (87 kW) Cummins QSF3.8 Tier 4 turbo diesel with DEF and SCR aftertreatment
      • Overall Height : 9' (274 cm) boom down
      • Overall Length : 22' 11" (699 cm) to fork frame
      • Overall Width : 8' 6" (259 cm)
      • Pallet Forks : 2.25 x 4 x 48" standard
      • Steering: 4 wheel, 2 wheel, and crab steer
      • System : Pressure comp, axial piston pump
      • Tires: 14.00 x 24, 16 ply, G2 tread air-fill standard
      • Transmission : Dana VDT12000 Series, 3-speed Powershift, forward & reverse
      • Turning Radius : 14' 4" (437 cm)

      Features

      • Damage-resistant, all-steel fuel and hydraulic tanks. Fuel tank provides ample fuel volume for a full day's work at 100% load.
      • The 1246X has a capable 12,000-pound load capacity rating. It achieves forward reach up to 30 feet and a maximum lift height of 46 feet, 6 inches.
      • Powered by a 117-horsepower Cummins QSF3.8 Tier 4 Final diesel engine with DEF and SCR aftertreatment. Side pod mounting offers easy service access while allowing excellent curbside visibility and ground clearance.

      Copy Set

      Attachments

      The 1246X can be equipped with a variety of attachments, including pallet, lumber or block forks, truss boom, utility bucket, standard carriage, side tilt carriage (+/- 10°), or side-swing carriage (+/- 60°). Optional 10-foot tower with standard carriage provides 10 extra feet of lift height.

      Premium Gauge Cluster

      Premium gauge cluster upgrade includes a 7-inch digital display.

      Rear-View Camera

      Rear-view camera system is included with the digital display, or available as an add-on to standard gauges.

      Tires

      Foam-filled, solid


      Enclosed Cab

      Enclosed cab with heater, wiper, defroster (A/C available)

      Outriggers

      Axle-mounted outriggers

      Sling Hook

      Sling hook available for additional securing of load

      Electrical to Boom Tip

      Electrical to boom tip (second hydraulic circuit, lighting, camera)

      Lighting

      High output LED lighting package (roading lights, turn signals, boom work light, amber beacon, dome)

      Pintle Hitch

      Bolt-on rear pintle hitch for towing

      Contact

      Contact

      Consignment

      Request a Service

      ×

      Leppo Rents Employee Portal

      ×

      Your session will expire in . If you want to reset this timer, please click OK.

      Change Your Preferred Location


      ×

      Leppo Rents Employee Portal