Pettibone TRAVERSE T1246X
| Make | Pettibone |
| Model | TRAVERSE T1246X |
| Type | Telehandlers |
How can we help?
Description
The Traverse T1246X offers a unique traversing boom carriage that allows users to precisely place loads at full lift height without having to coordinate multiple boom functions.
Drivetrain and axles have been optimized to provide greater tractive effort with minimal tradeoff on top end speed.
- Dana 223 Series high steer axles provide excellent tractive effort.
- Tight steer angle capability provides efficient turning radius.
- Dana VDT12000 Powershift transmission offers 3 speeds, forward and reverse.
- Full time 4-wheel-drive with limited-slip front axle differential.
Formed boom plates offer greater boom strength with less weight.
- Boom deflection minimized for better control and accuracy placing loads.
- Boom overlap nearly doubled to provide smoother operation and reduce contact forces on wear pads.
- Fastener-less wear pads simplify service.
- Bottom-mounted external extend cylinder significantly reduces load on wear pads; cylinder location also provides better service access to internal boom components.
- Compression tilt design allows for a smaller bore cylinder with same tilt force.
- Heavy-duty extension chains help ensure stable boom functions and longevity.
The Traverse's hydraulic circuit delivers exceptional controllability, efficiency and cycle speeds.
- Cylinder cushioning dampens the end of strokes – both extending and retracting – to prevent hard, jarring stops and avoid both wear-and-tear and potential load spills.
- Single lift cylinder provides operator with clear sight lines.
- Twin lines for tilt and auxiliary plumbing.
The operator cab includes ergonomic seat, pedal, joystick and steering wheel positions. Available as an open canopy or enclosed cab, it features an all-steel interior with water-resistant components for easy washdown.
- New analog/LCD gauge cluster.
- Enhanced climate control system.
- Split door design allows upper half to lock in the open position.
- Flat, bolt-in glass can easily be removed or replaced.
- Openable rear window improves air flow while keeping cab dry.
- Lockable storage area under seat for manual, gloves and tools.
- Split-system electrical panels allow for easier service of individual circuits.
- Heavy-duty bright LED lighting
- Weather-sealed connections
- USB accessory plug in cab
- 12-volt accessory plug in engine bay
Service
- Easy access to all filters and fluid level indicators.
- Lockable fuel-fill in clean, accessible location.
- Inside of boom easily accessible for service.
- Non-tensioned boom hoses offer long service life.
Models
Outriggers
The T1246X offers optional axle-mounted outriggers
- Machine chassis will sway independent of the outrigger system
- Outriggers positioned to provide clear visibility out to the fork tips
Tires
Foam-filled, solid
Premium Gauge Cluster
Premium gauge cluster upgrade includes a 7-inch digital display
Enclosed Cab
Enclosed cab with heater, wiper, defroster (A/C available)
Rear-View Camera
Rear-view camera system is included with the digital display, or available as an add-on to standard gauges
Sling Hook
Sling hook available for additional securing of load
Electrical to Boom Tip
Electrical to boom tip (second hydraulic circuit, lighting, camera)
Lighting
High output LED lighting package (roading lights, turn signals, boom work light, amber beacon, dome)
Attachments
The T1246X can be equipped with a variety of attachments, including pallet, lumber or block forks, truss boom, utility bucket, standard carriage, side tilt carriage (+/- 10°), or side-swing carriage (+/- 60°). Optional 10-foot tower with standard carriage provides 10 extra feet of lift height.
Pintle Hitch
Bolt-on rear pintle hitch for towing
Specifications
- Approximate Operating Weight : 29,750 lbs (13,494 kg) without outriggers 31,250 lbs (14,175 kg) with outriggers
- Axles : Dana 223 Series: 4-wheel drive, 45% limited slip front differential
- Below Grade Reach : 3' 2" (97 cm)
- Boom: 3-section, slide pad Automatic fork leveling without slave cylinder
- Brakes: Oil-immersed inboard disc service brakes, integral front SAHR park brake
- Controls: Single joystick, pilot operated
- DEF Tank : 5 gal. (19 L)
- Drawbar Pull (GVW) : 29,100 lbs (13,200 kg)
- Features : Fully proportional functions Auxiliary boom tip hydraulics Quick disconnect for attachments
- Fork Carriage : 48" (122 cm) standard
- Frame : 24° of leveling (12° right and left) Rear axle stabilization system
- Fuel Tank : 30 gal. (114 L)
- Ground Clearance : 19" (48 cm)
- Landing Height : 46' 6" (1,417 cm)
- Max Load Capacity : 12,000 lbs (5,443 kg)
- Maximum Forward Reach : 35' 10" (1,092 cm) at 24" LC 30' (914 cm) non-traversed
- Maximum Lift Height : 46' 6" (1,417 cm)
- Maximum Travel Speed : 15.2 mph (24.5 km/h)
- Model/Power : 117 HP (87 kW) Cummins QSF3.8 Tier 4 turbo diesel with DEF and SCR aftertreatment
- Overall Height : 9' (274 cm) boom down
- Overall Length : 22' 11" (699 cm) to fork frame
- Overall Width : 8' 6" (259 cm)
- Pallet Forks : 2.25 x 4 x 48" standard
- Steering: 4 wheel, 2 wheel, and crab steer
- System : Pressure comp, axial piston pump
- Tires: 14.00 x 24, 16 ply, G2 tread air-fill standard
- Transmission: Dana VDT12000 Series, 3-speed Powershift, forward & reverse
- Turning Radius : 14' 4" (437 cm)
Features
- Powered by a 117-horsepower Cummins QSF3.8 Tier 4 Final diesel engine with DEF and SCR aftertreatment. Side pod mounting offers easy service access while allowing excellent curbside visibility and ground clearance.
- The Traverse provides up to 70 inches of horizontal boom transfer, the industry's only new machine with this capability. With Traverse, the specified lift height is the same as the landing height. This stands in contrast to a traditional fixed boom pivot, where the true landing height is generally several feet less than the advertised lift height, as operators must account for withdrawing the forks out of the load with enough rearward travel for the fork tips to clear the landing zone.
- Damage-resistant, all-steel fuel and hydraulic tanks. Fuel tank provides ample fuel volume for a full day's work at 100% load.
- The T1246X has a capable 12,000-pound load capacity rating. It achieves forward reach up to 35 feet, 10 inches and a maximum lift height of 46 feet, 6 inches.
Copy Set
Outriggers
The T1246X offers optional axle-mounted outriggers
- Machine chassis will sway independent of the outrigger system
- Outriggers positioned to provide clear visibility out to the fork tips
Tires
Foam-filled, solid
Premium Gauge Cluster
Premium gauge cluster upgrade includes a 7-inch digital display
Enclosed Cab
Enclosed cab with heater, wiper, defroster (A/C available)
Rear-View Camera
Rear-view camera system is included with the digital display, or available as an add-on to standard gauges
Sling Hook
Sling hook available for additional securing of load
Electrical to Boom Tip
Electrical to boom tip (second hydraulic circuit, lighting, camera)
Lighting
High output LED lighting package (roading lights, turn signals, boom work light, amber beacon, dome)
Attachments
The T1246X can be equipped with a variety of attachments, including pallet, lumber or block forks, truss boom, utility bucket, standard carriage, side tilt carriage (+/- 10°), or side-swing carriage (+/- 60°). Optional 10-foot tower with standard carriage provides 10 extra feet of lift height.
Pintle Hitch
Bolt-on rear pintle hitch for towing