Pettibone TRAVERSE T944X

Pettibone
Pettibone
Pettibone
Pettibone
Pettibone
Pettibone
Pettibone
Pettibone
Make Pettibone
Model TRAVERSE T944X
Type Telehandlers

How can we help?


Description

The Traverse T944X features an extendable, traversing boom that moves loads by traveling horizontally. This unique capability provides greater safety and precision when placing loads.

Drivetrain and axles have been optimized to provide greater tractive effort with minimal tradeoff on top end speed.

  • Dana 212 Series high steer axles provide excellent tractive effort.
  • Tight steer angle capability provides efficient turning radius.
  • Dana VDT12000 Powershift transmission offers 3 speeds, forward and reverse.
  • Full time 4-wheel-drive with limited-slip front axle differential.

Newly designed boom with formed boom plates offers greater strength with less weight.

  • Boom deflection minimized for better control and accuracy placing loads.
  • Boom overlap nearly doubled to provide smoother operation and reduce contact forces on wear pads.
  • Fastener-less wear pads simplify service.
  • Bottom-mounted external extend cylinder significantly reduces load on wear pads; cylinder location also provides better service access to internal boom components.
  • Compression tilt design allows for a smaller bore cylinder with same tilt force.
  • Single extension chain eliminates the need to balance dual chains.

The Traverse's hydraulic circuit delivers exceptional controllability, efficiency and cycle speeds.

  • Cylinder cushioning dampens the end of strokes – both extending and retracting – to prevent hard, jarring stops and avoid both wear-and-tear and potential load spills.
  • Single lift cylinder provides operator with clear sight lines.
  • Twin lines for tilt and auxiliary plumbing.

The operator cab includes ergonomic seat, pedal, joystick and steering wheel positions. Available as an open canopy or enclosed cab, it features an all-steel interior with water-resistant components for easy washdown.

  • New analog/LCD gauge cluster.
  • Enhanced climate control system.
  • Split door design allows upper half to lock in the open position.
  • Flat, bolt-in glass can easily be removed or replaced.
  • Openable rear window improves air flow while keeping cab dry.
  • Lockable storage area under seat for manual, gloves and tools.
Electrical
  • Split-system electrical panels allow for easier service of individual circuits.
  • Heavy-duty bright LED lighting
  • Weather-sealed connections
  • USB accessory plug in cab
  • 12-volt accessory plug in engine bay
Service
  • Easy access to all filters and fluid level indicators.
  • Lockable fuel-fill in clean, accessible location.
  • Inside of boom easily accessible for service.
  • Non-tensioned boom hoses offer long service life.

Models

Tires

Air-filled, foam-filled, solid; Various tire tread options available


Premium Gauge Cluster

Premium gauge cluster upgrade includes a 7-inch digital display.

Rear-View Camera

Rear-view camera system is included with the digital display, or available as an add-on to standard gauges.

Engine

117 HP (87 kW) Cummins QSF3.8 Tier 4 turbo diesel with DEF and SCR aftertreatment

Enclosed Cab

Enclosed cab with heater, wiper, defroster (A/C available)

Attachments

The T944X can be equipped with a variety of attachments, including pallet, lumber or block forks, truss boom, utility bucket, standard carriage, side tilt carriage (+/- 10°), or side-swing carriage (+/- 60°).

Sling Hook

Sling hook available for additional securing of load

Electrical to Boom Tip

Electrical to boom tip (second hydraulic circuit, lighting, camera)

Fenders

Four axle mounted fenders

Lighting

High output LED lighting package (roading lights, turn signals, boom work light, amber beacon, dome)

Pintle Hitch

Bolt-on rear pintle hitch for towing

Specifications

  • Approximate Operating Weight : 22,500 lbs (10,206 kg)
  • Axles : Dana 212 Series: 4-wheel drive, 45% limited slip front differential
  • Below Grade Reach : 3' (92 cm)
  • Boom: 3-section, slide pad Automatic fork leveling without slave cylinder
  • Brakes: Oil-immersed inboard disc service brakes, integral front SAHR park brake
  • Controls: Single joystick, pilot operated
  • Drawbar Pull (GVW) : 22,050 lbs (10,002 kg)
  • Features : Fully proportional functions Auxiliary boom tip hydraulics Quick disconnect for attachments
  • Fork Carriage : 48" (122 cm) standard
  • Frame : 24° of leveling (12° right and left) Rear axle stabilization system
  • Fuel Tank : 30 gal. (114 L)
  • Ground Clearance : 18" (46 cm)
  • Landing Height : 44' (1,341 cm)
  • Max Load Capacity : 9,000 lbs (4,082 kg)
  • Maximum Forward Reach : 35' 10" (1,092 cm) at 24" LC 30' (914 cm) non-traversed
  • Maximum Lift Height : 44' 6" (1,356 cm)
  • Maximum Travel Speed : 15.2 mph (24.5 km/h)
  • Model/Power : 74 HP (55kW) Cummins QSF3.8 Tier 4 turbo diesel with DOC muffler
  • Overall Height : 8' 3" (243 cm) boom down
  • Overall Length : 22' (671 cm) to fork frame
  • Overall Width : 8' 6" (259 cm)
  • Pallet Forks : 2.25 x 4 x 48" standard
  • Steering: 4 wheel, 2 wheel, and crab steer
  • System : Pressure comp, axial piston pump
  • Tires: 13.00 x 24, 16 ply, G2 tread air-fill standard
  • Transmission : Dana VDT12000 Series, 3-speed Powershift, forward & reverse
  • Turning Radius : 14' 1" (429 cm)

Features

  • Damage-resistant, all-steel fuel and hydraulic tanks. Fuel tank provides ample fuel volume for a full day's work at 100% load.
  • The 74-horsepower Cummins QSF3.8 Tier 4 Final diesel engine features a DOC muffler and requires no diesel exhaust fluid (DEF). Side pod mounting offers easy service access while allowing excellent curbside visibility and ground clearance.
  • The T944X provides up to 70 inches of horizontal boom transfer, the industry's only new machine with this capability. With Traverse, the specified lift height is the same as the landing height. This stands in contrast to a traditional fixed boom pivot, where the true landing height is generally several feet less than the advertised lift height, as operators must account for withdrawing the forks out of the load with enough rearward travel for the fork tips to clear the landing zone.
  • The T944X has a capable 9,000-pound load capacity rating. It achieves forward reach up to 35 feet, 10 inches and a maximum lift height of 44 feet, 6 inches.

Copy Set

Tires

Air-filled, foam-filled, solid; Various tire tread options available


Premium Gauge Cluster

Premium gauge cluster upgrade includes a 7-inch digital display.

Rear-View Camera

Rear-view camera system is included with the digital display, or available as an add-on to standard gauges.

Engine

117 HP (87 kW) Cummins QSF3.8 Tier 4 turbo diesel with DEF and SCR aftertreatment

Enclosed Cab

Enclosed cab with heater, wiper, defroster (A/C available)

Attachments

The T944X can be equipped with a variety of attachments, including pallet, lumber or block forks, truss boom, utility bucket, standard carriage, side tilt carriage (+/- 10°), or side-swing carriage (+/- 60°).

Sling Hook

Sling hook available for additional securing of load

Electrical to Boom Tip

Electrical to boom tip (second hydraulic circuit, lighting, camera)

Fenders

Four axle mounted fenders

Lighting

High output LED lighting package (roading lights, turn signals, boom work light, amber beacon, dome)

Pintle Hitch

Bolt-on rear pintle hitch for towing

Contact

Contact

Consignment

Request a Service

×

Leppo Rents Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location


×

Leppo Rents Employee Portal