E10
E10
E10
E10
E10
E10

BOBCAT - E10 - COMPACT EXCAVATOR

Access jobsites where hand labor is your only other option.

• Ultra-compact design

• Retracted 28-inch track width

• Zero tail swing

OVERVIEW

• With a retracted track width of 28 inches, the ultra-compact Bobcat® E10 compact (mini) excavator allows you to easily navigate through narrower openings and operate in tighter conditions.

• Zero tail swing offers the greatest flexibility to slew and deposit spoil while offering the most protection against jobsite obstacles.

• Pass underneath branches, low openings and through doorways to get to your work area.

PERFORMANCE

SELECTABLE CONTROL PATTERN

Easily change between “excavator” and “backhoe” patterns. No keys are required.

2-SPEED TRAVEL

Maneuver faster with the Bobcat 2-Speed option. The quicker you can move on your jobsite, the faster you can complete your work. Select low range for pushing and dozing and high range for increased jobsite mobility.

FOLD-DOWN TIP OVER STRUCTURE (TOPS)

Pass underneath branches, low openings and through doorways to get to your work area.

RETRACTABLE BLADE & UNDERCARRIAGE

The hydraulically activated retractable undercarriage gives you the flexibility to access tight gates and doorways while maintaining its power as an excavating machine. The retractable blade also gives the operator greater ability to move in small areas.

COMFORT

ERGONOMIC CONTROLS

Operator-friendly, ergonomic controls keep you productive all day long. Control attachments with precision, flexibility and low fatigue. Grade, level and backfill with less operator input. Head to the next jobsite using the one-hand travel control. Adjust the arm rests for added comfort.

IN-CAB PATTERN SELECTOR

A pattern selector allows you to change from an “excavator” to a “backhoe” control pattern. No keys or special tools are required.

ADJUSTABLE CONTROL CONSOLES

The operator has the ability to adjust the LH and RH control consoles outward for comfort or inward for access through narrow openings.

HYDRAULIC JOYSTICK CONTROL

The hydraulic joystick control on the Bobcat excavator delivers smooth, fluid operation and increased efficiency.

SOFT GRIP JOYSTICKS

Bobcat excavators feature soft-grip pilot control joysticks that provide effortless control of the workgroup.

UPTIME PROTECTION

IN-TRACK SWING FRAME

The exclusive In-Track Swing Frame on Bobcat® compact excavators gets you closer to your work. When you dig in an offset position, the swing castings and cylinders remain within the tracks to help you work in small spaces. You can dig flush against an obstacle, minimizing the chances of inadvertent contact. Ultimately, you can reduce operating costs of repairs to your machines or adjacent structures. Other brands cannot match this feature: When they work in an offset digging position, their components extend outside the tracks and reduce their ability to dig in tight areas.

PROTECTED COMPONENTS

No other manufacturer provides so many job-proven features to give you more uptime in the field. Bobcat® compact excavators have more standard features that help you stay on the job longer.

Bobcat steel hydraulic lines offer better protection than rubber hoses. They’re routed through the lower portion of the boom swing casting and tucked securely into the top area of the boom structure, preventing costly damage and protecting component life. Hoses have more steel tubing, well-designed mounts and minimal fittings.

The boom, arm and attachment/bucket offer better lifting performance and even longer durability. Cast pivot joints provide precise pin alignment which lengthens the service life of pivot pins and bushings. The work group easily accommodates a second set of auxiliary hydraulics, so you can add the option faster and for less cost.

Plus, a strong, lightweight composite door withstands years of tough work, and the house structure protects the tailgate and side covers from damage.

SIMPLE MACHINE TIE-DOWN

Get on and off the jobsite faster. Secure your load quickly, without searching for hard-to-reach tie-downs.

TOP-MOUNTED BOOM CYLINDER

Vital machine components on Bobcat® E10 and E20 compact excavators are protected from damage by design. The hydraulic cylinder is mounted on top of the boom to prevent contact with the trench, bucket or nearby obstacles.

MULTIPLE TAILSWING CONFIGURATIONS

Choose an excavator model with the tail swing configuration that best matches the needs of your jobsite. Models provide different levels of maneuverability.

CONVENTIONAL TAIL SWING

Conventional tail swing models deliver the greatest lift capacity in the excavator lineup. Conventional tail swing excavators also have a narrower stance (width) for easier loading onto a trailer and better access through doorways, gates, property lines or other tight areas on the job site.

MINIMAL TAIL SWING

Minimal tail swing provides more maneuverability than conventional tail swing, however the rear of the house protrudes as much as 6 in. beyond the width of the tracks. Slew and deposit soil where you need it, reposition the machine fewer times, and worry less about inadvertently contacting any surrounding objects.

ZERO TAIL SWING (ZTS)

Zero Tail Swing (ZTS) excavators give you more unrestricted rotation and provides greater flexibility if you are constantly working close to objects or against a wall. The rear of the house stays within the width of the tracks through full rotation.

SERVICEABILITY

CENTRALIZED GREASE BANK

A centralized grease bank makes fast, simple work of lubricating the slew bearing and slew pinion. With the large opening, it’s simple and easy to reach the well-protected grease cylinder fitting and complete track tensioning.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications and data are subject to change without prior notice. Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.


Specifications

CAPACITIES - Fuel Tank:
4.2 gal
DIMENSION - Height:
87 in
DIMENSION - Height with Operator Cab:
87 in
DIMENSION - Length:
110 in
DIMENSION - Overall Length in Travel Position:
110 in
DIMENSION - Width:
28 in
ENGINE - Emissions Tier (EPA):
Tier 4
ENGINE - Engine Fuel:
Diesel
ENGINE - Horsepower :
ENGINE - Maximum Governed RPM:
2,370 rpm
ENGINE - Optional Horsepower:
ENGINE - Turbocharged Engine:
No
FEATURES - Air Conditioning:
FEATURES - Angle Blade:
FEATURES - Auxiliary Hydraulics:
Standard
FEATURES - Cab Enclosure:
FEATURES - Cab Heater:
FEATURES - Engine Shutdown:
FEATURES - Heater Air Conditioning:
FEATURES - Quick Tach System:
FEATURES - Radio:
FEATURES - Rubber Track:
Standard
FEATURES - Secondary Auxiliary Hydraulics:
FEATURES - Selectable Auxiliary Hydraulic Flow:
FEATURES - Tail Swing Type:
Zero
HYDRAULIC SYSTEM - Auxiliary Pressure:
2,756 psi
HYDRAULIC SYSTEM - Auxiliary Std Flow:
5.3 gal/min
PERFORMANCE - Arm Digging Force:
1,248 lbf
PERFORMANCE - Boom Swing - Left:
67°
PERFORMANCE - Boom Swing - Right:
64°
PERFORMANCE - Bucket Digging Force:
1,865 lbf
PERFORMANCE - Lift Radius:
79 in
PERFORMANCE - Max Dump Height:
72 in
PERFORMANCE - Maximum Dig Depth:
72 in
PERFORMANCE - Maximum Reach at Ground Level:
122.4 in
PERFORMANCE - Operating Weight:
2,593 lb
PERFORMANCE - Rated Lift Capacity:
965 lb
PERFORMANCE - Travel Speed - High:
1.7 mph
PERFORMANCE - Travel Speed - Low:
1.3 mph
PERFORMANCE - Weight Class:
1 t
ropstype:
Open
  • Specifications

    Specifications

    CAPACITIES - Fuel Tank:
    4.2 gal
    DIMENSION - Height:
    87 in
    DIMENSION - Height with Operator Cab:
    87 in
    DIMENSION - Length:
    110 in
    DIMENSION - Overall Length in Travel Position:
    110 in
    DIMENSION - Width:
    28 in
    ENGINE - Emissions Tier (EPA):
    Tier 4
    ENGINE - Engine Fuel:
    Diesel
    ENGINE - Horsepower :
    ENGINE - Maximum Governed RPM:
    2,370 rpm
    ENGINE - Optional Horsepower:
    ENGINE - Turbocharged Engine:
    No
    FEATURES - Air Conditioning:
    FEATURES - Angle Blade:
    FEATURES - Auxiliary Hydraulics:
    Standard
    FEATURES - Cab Enclosure:
    FEATURES - Cab Heater:
    FEATURES - Engine Shutdown:
    FEATURES - Heater Air Conditioning:
    FEATURES - Quick Tach System:
    FEATURES - Radio:
    FEATURES - Rubber Track:
    Standard
    FEATURES - Secondary Auxiliary Hydraulics:
    FEATURES - Selectable Auxiliary Hydraulic Flow:
    FEATURES - Tail Swing Type:
    Zero
    HYDRAULIC SYSTEM - Auxiliary Pressure:
    2,756 psi
    HYDRAULIC SYSTEM - Auxiliary Std Flow:
    5.3 gal/min
    PERFORMANCE - Arm Digging Force:
    1,248 lbf
    PERFORMANCE - Boom Swing - Left:
    67°
    PERFORMANCE - Boom Swing - Right:
    64°
    PERFORMANCE - Bucket Digging Force:
    1,865 lbf
    PERFORMANCE - Lift Radius:
    79 in
    PERFORMANCE - Max Dump Height:
    72 in
    PERFORMANCE - Maximum Dig Depth:
    72 in
    PERFORMANCE - Maximum Reach at Ground Level:
    122.4 in
    PERFORMANCE - Operating Weight:
    2,593 lb
    PERFORMANCE - Rated Lift Capacity:
    965 lb
    PERFORMANCE - Travel Speed - High:
    1.7 mph
    PERFORMANCE - Travel Speed - Low:
    1.3 mph
    PERFORMANCE - Weight Class:
    1 t
    ropstype:
    Open

Related Inventory For Sale

Contact

Contact

Consignment

Request a Service

×

Leppo Rents Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location


×

Leppo Rents Employee Portal