BOBCAT - E19E - BATTERY-ELECTRIC COMPACT EXCAVATOR

Featuring state-of-the-art lithium-ion battery technology, the conventional tail-swing E19e provides the same power as its diesel-powered equivalents, with near-instantaneous torque.

• Two-speed travel with auto shift

• On-board charger accepts a common, 120-volt electrical connection

• Standard long arm  

• Retractable undercarriage and retractable blade

• Auxiliary hydraulics with two-way flow

• Optional off-board, fast-charge system

OVERVIEW

• With a small footprint, zero emissions and an in-track swing frame, the E19e can work on small outdoor jobsites as well as indoors, where the alternative is manual labor.

• The E19e is powered by three lithium-ion batteries that provide a total capacity of 17.28 kWh. The batteries deliver high-energy density, long service life and require no routine maintenance.

• The standard long-arm gives operators added reach and dig depth, while the increased cylinder size offers excellent breakout forces and lifting ability. Hydraulically retract the undercarriage to just 39-inches wide for access to small job sites - both indoors and out. Then return the undercarriage to its 54-inch stance for a wider footprint and leading performance. The blade also can be retracted at each side for greater access to jobsites.

PERFORMANCE

RELIABLE BATTERY POWER

The Bobcat electric excavator lineup delivers all the benefits of owning and operating an electric-powered compact excavator without sacrificing performance. We’ve turned the concept of reliable battery power into a proven game changer in the compact equipment industry.

Featuring state-of-the-art, lithium-ion battery technology, the E10e, E19e and E32e perform as well – or better – than their diesel-powered equivalents, providing the same power, and near-instantaneous torque. The battery systems deliver high-energy density, long service life and require no routine maintenance. The result is strong breakout forces, smooth operator control functions and loads of workgroup power. The batteries provide about four hours of continuous runtime, or between six and eight hours of runtime using breaks to recharge.

THE E19E BATTERY SYSTEM

The E19e is powered by three lithium-ion batteries that provide a total capacity of 17.28 kWh. The battery system supplies power to an electric motor which drives hydraulic pumps. The pumps pressurize hydraulic fluid for operation of the excavator’s workgroup functions, attachments and tracks. The lithium-ion batteries also power an independent 12-volt battery system which runs the work lights and certain controls.

• An on-board charger, capable of receiving common electrical connections of 120 volts, supports overnight charging of about 12 hours.

• An off-board, 240-volt, fast-charge system is also available for full battery recharge in just 1.5 to 2 hours.

MOTION ALARM AND BEACON LIGHT

The standard motion alarm (audio signal) activates when the excavator is traveling. The E10e, E19e and E32e also feature a standard beacon light on the top of the canopy. The beacon emits a bright orange strobe light whenever the excavator is turned on. The E10e and E32e are also equipped with a horn for added operational awareness.

ROPS, TOPS and FOPS

The E19e features a roll-over protective structure (ROPS), a tip-over protective structure (TOPS) and falling object guard structure (FOPS).

SELECTABLE CONTROL PATTERN

Access to the control pattern selector is easier than ever. The easy-access location lets you choose between ISO and standard patterns without leaving the operator’s seat. No keys or special tools are required.

CONVENTIONAL TAIL SWING

Compared to their minimal or zero tail swing counterparts, conventional tail swing models typically deliver the greatest lift capacity in the Bobcat® excavator lineup. Conventional tail swing excavators have a narrower stance (width) for improved access through doorways, gates, property lines or other restrictions.

STANDARD LED WORK LIGHTS

The E19e features robust lighting with two LED work lights mounted on the top front of the canopy, an LED work light on the top rear of the canopy and a boom-mounted LED work light.

RETRACTABLE BLADE

The standard blade can be retracted at each side for greater access to tight jobsites. Once in position for work, the blade can be extended to cover more ground.

RUBBER TRACKS

The short pitch, interlocking rubber tracks provide optimal engagement with the rollers, reducing vibration during travel and delivering a more comfortable ride.

AUXILIARY HYDRAULICS WITH BOOM-MOUNTED QUICK COUPLERS

The auxiliary hydraulic couplers, located on the excavator boom, are in easy reach for quick connections. The quick couplers feature a low-profile design, set close to the boom’s surface to protect against damage.

FINGERTIP BOOM SWING CONTROL

Bobcat® excavator controls allow you to make fine movements with low effort and maximum comfort – so you can get precise results in less time, with less fatigue. With the boom swing control on the joystick, you get more floor space and foot room for better operator comfort during long work days.

VERSATILITY

ZERO EMISSIONS / SMALL FOOTPRINT

With a small footprint, zero emissions and in-track swing frame, the E10e, E19e and E32e can gain access and work where other excavators can’t. Producing no emissions, these excavators can work indoors as well as on tight outdoor jobsites – work areas where the alternative is often intensive and costly manual labor. Having a Bobcat electric compact excavator in your fleet can also generate new business opportunities among a growing number of companies, government agencies and individuals who support eco-friendly jobsite practices and a more sustainable future. Government agencies and businesses are increasingly adopting environmental, social and governance principles that give priority to sustainable business practices.

LOW NOISE

Producing a fraction of the noise of their diesel-powered equivalents, these machines can be operated all hours of the day, even in dense urban areas where noise levels can limit work hours and throw you off schedule. Work throughout the day or night with minimal disturbance around the worksite.

LEADING ATTACHMENT VERSATILITY

Bobcat excavators have your business expansion built right in. You can do more than just dig with a variety of attachments to choose from. Easily add a hydraulic breaker. Use the standard auxiliary quick couplers. Many attachments can also be used with your Bobcat loader.

Bobcat designs and builds attachments that will expand your excavator’s versatility and help you get more done in less time. The E10e, E19e and E32e can operate most attachments available for diesel-powered equivalents.

IN-TRACK SWING FRAME

Bobcat® compact excavators are engineered to operate in the smallest of workspaces for leading versatility. The exclusive Bobcat in-track swing frame allows you to get closer to your work. Bobcat swing castings and cylinders stay within the tracks when offset digging – giving you the ability to truly dig flush up against an obstacle and increasing your ability to work in tight areas when in an offset digging position.

HYDRAULICALLY RETRACTABLE UNDERCARRIAGE

Hydraulically retract the undercarriage to just 39-inches wide for access to small job sites - both indoors and out. Then return the undercarriage to its 54-inch stance for a wider footprint and leading performance. The blade also can be retracted at each side for greater access to jobsites.

DOZER BLADE WITH EXTENSIONS

The standard blade can be retracted at each side for greater access to tight jobsites. Once in position for work, the blade can be returned to its full width for greater ground coverage.

UPTIME PROTECTION

LOWER OVERALL MAINTENANCE

With fewer components and fluids, regular maintenance and repair costs are significantly reduced as well as work time lost to maintenance and repairs. All the regular maintenance that’s required to keep diesel engines in top running order is eliminated. The lithium-ion batteries that power the E10e, E19e and E32e require no routine maintenance and are protected against overcharging.

ON-BOARD CHARGER

An on-board charger, capable of receiving common electrical connections of 120 volts, supports charging of about 12 hours.

OFF-BOARD CHARGER

An off-board, 240-volt, fast-charge system is also available for full battery recharge in just two hours.

LITHIUM-ION BATTERIES

The lithium-ion batteries require no routine maintenance and has built-in protection against overcharging.

BATTERY STATUS METER

An easy-to-read indicator clearly displays the machine’s battery power level to help you efficiently manage your workday.

PROTECTED MACHINE COMPONENTS

Bobcat® compact excavators are engineered to protect against damage. All Bobcat® compact excavators are equipped with protected hydraulic lines and well-designed workgroups. The boom’s hydraulic cylinder is mounted on the top to prevent contact with the trench, bucket or nearby obstacles.

SIMPLE MACHINE TIE-DOWNS

Convenient tie-down locations allow you to confidently secure your machine to trailers. Get on and off the job site faster. Secure your load quickly, without searching for hard-to-reach tie-downs.

CONTROL LOCKOUT

The control lockout levers stop the motor and disengage the hydraulic control functions from the controls when either console is raised. Lower the control consoles to start the motor and engage the hydraulic control functions of the controls.

VANDALISM PROTECTION

Keep the battery compartment securely latched and locked to prevent tampering or vandalism after hours.

COMFORT

ELECTRIC POWERTRAIN

The electric powertrain provides for a much more comfortable operator experience with dramatically reduced vibration and noise. Neighbors appreciate the low noise as well. Other features that reduce vibration and improve the operator experience include tighter connections between body panels, as well as robust hinges and latches. All these features work together to make operating your Bobcat E10e, E19e and E32e compact excavator more comfortable for longer, more productive days on the jobsite comfort.

CANOPY

The E19e operator station features the comfort and intuitive control functionality that operators need for all-day productivity. The operator-centric design includes excellent visibility and ergonomic controls with more functionality at your fingertips.

ERGONOMIC CONTROLS

Operator-friendly, ergonomic controls keep you productive all day long. Control attachments with precision and low fatigue. Grade, level and backfill with less operator input. Head to the next job site using the one-hand travel control. Adjust the arm rests for added comfort.

SPACIOUS FLOOR

The floor provides a wide, unobstructed and comfortable area for your feet. The flat floor with removable floor mat makes cleaning easier.

FOLD-BACK FOOT PEDALS

The E10e, E19e and E32e feature fold-away foot pedals for maximum floor space.

DIGITAL DISPLAY

The digital display provides full-featured machine interaction and monitoring capabilities. Diagnostics and detailed operation information you can access through the display includes monitoring, troubleshooting, battery charge status and error conditions. Run your equipment more efficiently and solve problems in the field with the on-screen content.

SECOND AUXILIARY THUMB TOGGLE

A switch on the left joystick allows you to conveniently alternate between second auxiliary and the boom offset. You don't have to take your hand off the joystick and your eyes off your work to search for the control.

SERVICEABILITY

BATTERY POWER REQUIRES FEWER COMPONENTS AND FLUIDS

With fewer components and fluids, regular maintenance and repair costs are significantly reduced as well as work time lost to maintenance and repairs. All the regular maintenance that’s required to keep diesel engines in top running order is eliminated. The lithium-ion batteries that power the E10e, E19e and E32e require no routine maintenance and are protected against overcharging.

CENTRALIZED GREASE BANK

A centralized grease bank makes fast, simple work of lubricating the slew bearing and slew pinion.

GREASELESS COMPOSITE BUSHINGS

Bushings for the base of the offset cylinder requires no grease, simplifying regular maintenance for your excavator.

The greaseless boom swing cylinder pin joint on R-Series excavators eliminates an important greasing item from your daily checklist to save maintenance time and increase work time.

TWO-PIECE FLOOR MATT

The E19e features an easy-to-remove floor mat.

TOOL-FREE SIDE SCREEN

The side screen opens, providing a wide opening for service.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications and data are subject to change without prior notice. Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.